Acura MDX 2020 Owner's Manual page 202

uuAdjusting the SeatsuHead Restraints
■
Changing the Second Row Center Seat Head Restraint
Position *
■
Removing and Reinstalling the Head Restraints
Front and second row head restraints
Head restraints can be removed for cleaning or repair.
To remove a head restraint:
Pull the restraint up as far as it will go. Then push the release button, and pull the
restraint up and out.
To reinstall a head restraint:
Insert the legs back in place, then adjust the head restraint to an appropriate height
while pressing the release button. Pull up on the restraint to make sure it is locked
in position.
* Not available on all models
200
A passenger sitting in the second row center
seating position should adjust the height of
their head restraint to an appropriate position
before the vehicle begins moving.
To raise the head restraint:
Pull it upward.
To lower the head restraint:
Push it down while pressing the release
button.
1Removing and Reinstalling the Head Restraints
WARNING
3
Failure to reinstall, or correctly reinstall, the
head restraints can result in severe injury
during a crash.
Always replace the head restraints before
driving.