Sonos 80 Setup Manual page 9

Sonos ZonePlayer ZP80 Setup Guide
Insert the Sonos System Setup CD-ROM (included with your ZonePlayer) and follow the
3
prompts to connect your ZonePlayer ZP80 and set up access to your music files.
Note: Firewall software such as Norton Internet Security™, McAfee™ Personal
Firewall, Windows® Service Pack 2, or Mac OS X built-in firewall, can block the
operation of your Sonos Desktop Controller software. During installation, you may
see prompts from your firewall software indicating that the Sonos application is
attempting to perform certain operations. You should always allow full access to
the Sonos application. You may also need to change the settings of your firewall
software to ensure that Windows file sharing is not blocked. Please go to our Web
site at http://faq.sonos.com/firewall for detailed instructions.
If you are adding to an existing Sonos system
Important: If you want to replace the wired ZonePlayer in your music system with a
ZonePlayer ZP80, first add the new ZonePlayer ZP80 to your music system (steps
below). You can then unplug the wired ZonePlayer, replace it with the ZP80, and
move the original ZonePlayer to a new location.
1. Attach the power cord and plug in the ZonePlayer ZP80.
2. If you are making a wired connection, connect a standard Ethernet cable. If you are making
a wireless connection, skip this step and continue.
3. Choose one of the following options:
• Use the Sonos Controller to add the ZonePlayer ZP80 to your music system by selecting
System Settings→Add a ZonePlayer from the Music menu. Or,
• Use the Desktop Controller software to add the ZonePlayer ZP80 to your music system by
selecting Zones→Set Up Zones→Add.
For use with:
•
Windows XP, including Windows XP
Media Center
•
Windows 2000
•
Mac OS X, version 10.3 or higher
If your operating system is not one of these, go to
http://faq.sonos.com/nodcr for setup assistance.
5