Cleaning Modes - LG VR637 Series Owner's Manual

CLEANING MODES

Zigzag Cleaning
In 'Zigzag' mode, Robot Cleaner repeats a zigzag
operation to clean each and every spot in the
cleaning area.
If you need to quickly clean an area choose
'Zigzag' mode.
Press 'Mode' button on Remote Controller or
main unit to select 'Zigzag' mode and press 'Start'
button.
※ Factory release default setting is 'Zigzag'.
Cell by Cell Cleaning
In 'Cell by Cell' mode, Robot Cleaner cleans the
area by dividing it into rectangular spaces.
For meticulous cleaning, select this mode.
Press 'Mode' button on Remote Controller to
select 'Cell by Cell' mode and press 'Start' button.
The 1st stage:
The maximum outline of 3 m x 3 m of cleaning
area will be cleaned. (The size of the outline
may vary in accordance with the shape of the
area to be cleaned.)
The 2nd stage:
The 2nd stage of Cell by Cell cleaning engages
a Zigzag mode automatically.
When the 1st, and 2nd stages are completed,
the cleaned area will be cleaned again through
the repetition of the above cleaning method as
the device advances to the next part of cleaning
area.
Tip
• Once set up, the cleaning mode(Zigzag, Cell by Cell) setting will be maintained even
after the power supply is turned off.
• During operation, if a mode change is required, press the Stop/OK button and then select
the mode. Cleaning will then start from the beginning.
20