Table of Contents
Advertisement
Manual Cleaning
Manual mode moves the Robot Cleaner manually to the front, back and either side using the arrow
buttons on the remote.
While in Manual mode, the Robot Cleaner runs into obstacles placed behind it if the back arrow key
on the remote is held down.
Spot Cleaning
The Spot mode cleans the area where it is placed within a 4
Starting Spot Mode
1. Place the Robot Cleaner in the desired cleaning area.
2. Press the Mode button continuously until the Spot mode icon displays in the screen.
3. Press the Start button.
※ The Spot mode cannot be selected while the Robot Cleaner is recharging.
AUXILIARY CLEANING MODES
ft (1.37 m) diameter.
/
1
2
completing the cleaning(takes 4~5 min.).
It stops at the original position after
25
Advertisement
Table of Contents
