Parts Names And Instructions; Overload And Overheating Protection - Panasonic MJ-CB600 Operating Instructions Manual

■
Juicer
Container Unit
Pulp Container
(Approx. 2.0 L)
Clamps (Both sides)
Power Plug *
Power Cord
Rotary Switch

Overload and Overheating Protection

In case of overload and overheating, the protection device is triggered to stop operation and it is not abnormal.
After rotation stops, follow the below steps:
● Do not use the appliance repeatedly without any countermeasure.
1
Turn the rotary switch to "0" position, unplug the appliance.
2
Remove attachment from motor housing. Remove accumulated food residue from the spinner/container cover.
● Remove the prohibited ingredient if used.
3
Reset the attachment, then start again. (P. EN6)
If the appliance still does not operate after performing the above, overheating protection has been activated.
Turn the rotary switch to "0" position, unplug and rest the appliance for about 15 minutes or more (until motor housing
returns to a normal temperature) to release overheating protection before using again.
(If appliance still does not operate, contact Panasonic Service Centre for inspection or repair.)
OI5 JZ50M166_ML_Booklet.indb 5 OI5 JZ50M166_ML_Booklet.indb 5

Parts Names and Instructions

Food Pusher
Feeding Tube
Container Cover
Spinner Pad
Spinner
Container
Spout
Cup Cover
(Approx. 1.5 L)
Juice Cup
Motor Housing
(Material
MJ-CB600: Metal
MJ-CB100: Plastic)
■
Accessory
Brush
Rotary Switch
2 High speed
1 Low speed
0 OFF
* The shape of the power plug may be different from
illustration.
● Illustrations of product in this instructions are exemplified
by MJ-CB100.
EN5
2023/1/6 21:05:51 2023/1/6 21:05:51