Ryobi R36XLMWP6 Manual page 15

7 7
6 6
ADJUSTING THE CUTTING HEIGHT
To adjust the deck height, pull the height
adjustment lever towards the wheel, then
raise or lower the deck to the preferred
height. Make sure that the handle is always
secured into one of the height slots.
NOTE: The cutting height can be adjusted
to 7 positions. Cutting heights may vary in
particular products. Start the mower at the
highest position, before cutting the grass.
REPLACING THE BLADE
1. Open the battery door and remove the
battery packs. Remove the safety key,
and close the battery door.
2. Remove the side discharge chute and
close the side discharge chute cover. Tilt
the product on its side.
7 7
6 6
1
2
1
2
2
1
3
3
15
Operation