Download Print this page

Samsung WW8 T30 Series User Manual page 389

Hide thumbs Also See for WW8 T30 Series:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 342
Problem
Machine stops.
Fills with the wrong
water temperature.
Load is wet at the end of
a cycle.
WW3000TM_7-9KG_LE_8C104-000582_EN.indd 49
WW3000TM_7-9KG_LE_8C104-000582_EN.indd 49
Plug the power cord into a live electrical outlet.
Check the fuse or reset the circuit breaker.
Close the door and press the Start/Pause button to start the washing
machine.
For your safety, the washing machine will not tumble or spin unless the
door is closed.
Before the washing machine starts to fill, it will make a series of clicking
noises to check the door lock and does a quick drain.
There may be a pause or soak period in the cycle. Wait briefly and the
washing machine may start.
Make sure the mesh filter of the water supply hose at the water taps are
not clogged. Periodically clean the mesh filter.
If the washing machine is not supplied with sufficient power, the
washing machine temporarily will not drain or spin. As soon as the
washing machine regains sufficient power, it will operate normally.
Fully open both taps.
Make sure the temperature selection is correct.
Make sure the hoses are connected to the correct taps. Flush water lines.
Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot
water at the tap. Also, check the water heater capacity and recovery rate.
Disconnect the hoses and clean the mesh filter. The mesh filter may be
clogged.
While the washing machine fills, the water temperature may change
as the automatic temperature control feature checks incoming water
temperature. This is normal.
While the washing machine fills, you may notice just hot and/or just cold
water going through the dispenser when cold or warm temperatures are
selected.
This is a normal function of the automatic temperature control feature
as the washing machine determines the water temperature.
Use the High or Extra High spin speed.
Use high efficiency (HE) detergent to reduce oversudsing.
Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
Make sure the drain hose is not kinked or clogged.
Action
English 49
2021-02-01
2021-02-01
12:13:26
12:13:26

Advertisement

loading

This manual is also suitable for:

Ww9 t30 seriesWw7 t30 series