Samsung WW8 T30 Series User Manual page 363

Hide thumbs Also See for WW8 T30 Series:

Available languages

STEP 4 Connect the water hose

The provided water hose may differ depending on the model. Please follow the instruction according to

the provided water hose.

Connecting to a threaded water tap

If there is a water leak, stop operating the washing machine and disconnect from the electrical supply.

Then, contact a local Samsung service centre in case of a leak from the water hose, or contact a plumbing

technician in case of a leak from the water tap. Otherwise, this may cause electric shock.

WW3000TM_7-9KG_LE_8C104-000582_EN.indd 23

Connect the water hose to the water tap, and

then turn it to the right to tighten.

Before connecting the water hose, make sure

there is a rubber washer in the hose connector.

Do not use the hose if the washer is damaged or

2. Connect the other end of the water hose to

the inlet valve on the back of the washing

machine and then turn it to the right to

3. Slowly open the water tap and check if there

are any leaks around the connection areas. If

there are water leaks, repeat step 1 and 2.

Chapters

Ww9 t30 series Ww7 t30 series