Advertisement
Available languages
Available languages
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
NOTES:
• The temperature of hot and cold water depends upon
the temperature of the water entering your washer.
• Warm and cool water will be cooler than what your
previous washer provided.
• Even in a cold and cool water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
EXTRA RINSE
3
This option can be used to automatically add a second rinse
to most cycles.
NOTE: To open the lid during the rinse or extra rinse phase
after the first spin, you must first press START/STOP/PAUSE/
UNLOCK LID to unlock the lid.
WASH CYCLE KNOB
4
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
START/STOP/PAUSE/UNLOCK LID BUTTON
4 5
• Press to start the selected cycle.
• Press again to pause the cycle and unlock the lid.
• Press and hold for 3 seconds to cancel a cycle.
NOTE: If the washer is spinning, it may take several
minutes to unlock the lid.
Use to Manually Soak Garments:
Press START/STOP/PAUSE/UNLOCK LID and keep the lid
closed. After items have soaked for the desired time, press
START/STOP/PAUSE/UNLOCK LID to resume the wash cycle.
CYCLE STATUS LIGHTS INDICATOR
6
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds
or pauses that are different from traditional washers.
SENSING FILL
When the Start/Stop/Pause/Unlock Lid button is pressed,
the washer will fill with water and begin the wash cycle.
WASH
You will hear the agitator moving the load. The motor
sounds may change at different stages in the cycle.
The wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear the
motor turning on briefly (short hum) to move the basket
while filling.
FINAL SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle.
CYCLE COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
To allow for higher spin speeds, the lid
will lock and the Lid Locked light will turn
on. When this light is lit, the lid is locked
and cannot be opened. When this light is
off, the lid is unlocked and can be opened.
If you need to open the lid, press
START/STOP/PAUSE/UNLOCK LID.
The lid will unlock once the washer
movement has stopped. This may
take several minutes if the load was
spinning at high speed. Press START/
STOP/PAUSE/UNLOCK LID again to
resume the cycle.
5
Advertisement
