Quest Tm Remote Control - Hoover BH70705 Instruction Manual

Quest remote control
TM
Pull the tab to
( ) - Turn ON/OFF
activate your
( ) - Start cleaning
remote control.
NOTE:
Quest ™ automatically returns to the docking station and docks itself
when its running low on battery power. If it fails to dock after a few attempts, you
may manually position it correctly on the docking station. After fully charged (4.5-
5.5) hours, Quest ™ turns all the LEDs off and is ready to use.
Remote control guide found on Hoover.com
Directional buttons.
2X - Quest will
™
complete 2 cleaning
cycles including one
charging cycle.
( ) activates smart fence
Quiet Mode:
where your invisible wall is
( ) - to enable/
Low placed. After Quest
disable quiet mode.
the current room (approx
30 min), smart fence will
deactivate and allows
IMPORTANT:
During quiet operation
Quest
mode, suction rate and
manually deactivate smart
speed of your Quest ™
may be lower. fence at any time,
press the key again.
cleans
™
to pass through. To
™
12