Emptying The Dirty Water Tank - Bissell CROSSWAVE CORDLESS MAX 2765G Quick Start Manual

Emptying the Dirty Water Tank

Go to global.BISSELL.com for a full list of how-to videos.
When the dirty water tank is full, your machine will turn OFF, beep and the dirty water tank full icon
will blink orange on the digital display.
1.
To remove the dirty water
tank, press the button on top
of the tank, grab the front
handle and pull the tank out.
4.
Pour the dirty water into
the sink and rinse the dirty
water tank.
7.
Leave the parts out to dry
before reassembling.
WARNING
troubleshooting checks.
8 global.BISSELL.com
2.
Remove the top of the dirty
water tank by grasping the
recessed areas on each side of
the filter and pulling up.
5.
Remove the filter from the
top of the dirty water tank by
pulling it up.
8.
Once all parts are dry,
reassemble the filter and the
dirty water tank cover.
To reduce the risk of electrical shock, turn power button OFF before performing maintenance or
3.
Separate the hair and
debris from the dirty water by
grasping the strainer tab and
pulling up. Throw the debris
into the trash.
6.
Hand wash the filter and
screen with warm water and
mild detergent.
Rinse the bottom of the dirty
water tank cover.
9.
Angle the dirty water tank
back into the body of the
machine. Insert the bottom of
the tank first, then pivot the
top toward the machine until it
"clicks" into place.