System Menu - Elation PIXEL DRIVER 4000 V3 User Manual

SYSTEM MENU

MODE
DIMMER MODE
KLINGNET MODE
ARTNET MODE
SET UP UP/DOWN
Manual Control
Red Dimmer
Red: xxx
Manual Control
Green Dimmer
Green: xxx
Manual Control
Blue Dimmer
Blue: xxx
Manual Control
White Dimmer
White: xxx
Manual Control
Out1: Enable/Disable
Manual Control
Out2: Enable/Disable
Output enable or
disable
Manual Control
Out3: Enable/Disable
Manual Control
Out4: Enable/Disable
Klingnet Out x
Pixel Bar xxx IP
Pixel Bar Setup Klingnet Out x
xxx IP Number xx
Klingnet Out x
xx X xx RGB Pixels
Klingnet Out x
LED Tape 170
Klingnet Out x
LED Tape Setup LED Tape 170 Numer xx
Klingnet Out x
xx X xx RGB Pixels
Klingnet Out x
Pixel Wash 40IP
Pixel Wash 40IP
Setup
Klingnet Out x
40IP Number xx
IP Address Out x
IP Address Set
xxx:xxx:xxx:xxx
Universe Out x
DMX Universe Set
U:xxxxx
CONTINUED ON NEXT PAGE
18
DESCRIPTION
Adjust the intensity of the red
color.
Adjust the intensity of the green
color.
Adjust the intensity of the blue
color.
Adjust the intensity of the white
color (Pixel Wash 40IP only)
Enable or disable output 1.
Enable or disable output 2.
Enable or disable output 3.
Enable or disable output 4.
Select the pixel bar model that
will be connected to each output.
• x = output port #
• xxx = pixel bar model
Select the number of pixel bar
units that will be connected to
each output.
• x = output port #
• xx = number of units
• xxx = pixel bar model
Set RGB Channel mode, see Pixel
Modes section of this manual for
details.
Select the output x.
Select the number of LED Tapes
(xx) that will be controlled by the
output.
Set RGB Channel mode, see Pixel
Modes section of this manual for
details.
Select the output x.
Select the number of pixel wash
units that will be connected to
each output.
• x = output port #
• xx = number of units
Set IP address of each output.
Set DMX universe of each output.