Making Coffee; Selecting The Coffee Taste; Selecting The Quantity Of Coffee In The Cup; Adjusting The Grinder - DeLonghi ECAM22.320.SB Instructions For Use Manual

1. press the MENU button to access the menu;
2. press the or
displayed;
3. press the button
4. By pressing the or
- how many coffees have been made;
- how many times the machine has been descaled;
- the total number of litres of water delivered;
- how many times the water filter has been replaced.
5. Then press the

MAKING COFFEE

Selecting the coffee taste

The appliance is set by default to make coffee with a standard
taste.
you can also choose one of these tastes:
extra-mild taste
mild taste
Standard taste
Strong taste
extra-strong taste
To change the taste, press the
(fig. 7) until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to automatically make the
following quantities of coffee:
- short espresso coffee, when the
(≃40ml);
- long espresso coffee when the
(≃120ml);
- two short espresso coffees when the
pressed;
- two long espresso coffees when the
pressed.
To change the quantity of coffee the appliance delivers
automatically into the cup, proceed as described below:
- press the button corresponding to the quantity to be
modified and hold it down until "program quantity" is
displayed, then release the button;
- when the coffee in the cup reaches the desired level, press
the same button again to memorise the new amount.
The machine is now reprogrammed with the new quantities.

Adjusting the grinder

The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
however, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery
button until "Statistics" is
;
button you can check:
button twice to exit menu.
button repeatedly
button is pressed
button is pressed
button is
button is
is too slow (in drops), this can be corrected by adjusting the
grinding dial (fig. 8).
Please note :
The grinding dial must only be turned while the coffee mill is
in operation.
These adjustments will only be evident after at least 2 cups of
coffee have been delivered.
if this adjustment does not obtain the desired result, turn the
dial another click.

Tips for a hotter coffee

For hotter coffee, you should:
• before delivering the coffee, perform a rinse cycle by
pressing the
the spout, heating the internal circuits of the appliance
and thus raising the coffee temperature;
• warm the cups by rinsing them with hot water (using the
hot water function);
• increase the temperature of the coffee in the menu (page
10).

Making coffee using coffee beans

Important!
do not use caramelised or candied coffee beans as they could
stick to the coffee mill and damage it.
1. Fill the container with coffee beans (fig. 9).
2. place under the coffee spouts:
- 1 cup, if you want to make 1 coffee (fig. 10);
- 2 cups, if you want 2 coffees (fig. 11).
3. lower the spout as close as possible to the cup(s). a
creamier coffee is obtained in this way (fig. 12).
4. press the button for delivery of the required coffee.
SHORT
RISTRETTO
5. delivery begins and the selected quantity and taste are
displayed.
once the coffee has been made, the appliance is ready to be
used again.
11
if the coffee is delivered too slowly or
not at all, turn one click clockwise.
For fuller bodied creamier coffee,
turn one click anticlockwise (do not
turn more than one click at a time
otherwise the coffee could be delive-
red in drops).
button. hot water is delivered from
lONG
LUNGO