3
|
About the system
3 About the system
3.1 Components in a typical system layout
User reference guide
10
Depending on the system layout, the system can:
▪
Heat up a space
▪
Cool down a space
▪
Produce domestic hot water (if a DHW tank is installed)
INFORMATION
Cooling is only applicable in case of:
▪
Reversible models
▪
Heating only models + conversion kit
INFORMATION
If underfloor heating is installed in the main zone, then in cooling mode the main
zone can only provide refreshment. Real cooling is then NOT allowed.
C
b
a
A Main zone. Example: Living room.
B Additional zone. Example: Bedroom.
C Technical room. Example: Garage.
a Outdoor unit heat pump
b Indoor unit heat pump
c Domestic hot water (DHW) tank
d User interface of the indoor unit
e Dedicated Human Comfort Interface (BRC1HHDA used as room thermostat)
f Underfloor heating
g Radiators, heat pump convectors, or fan coil units
INFORMATION
The indoor unit and the domestic hot water tank (if installed) can be separated or
integrated depending on the indoor unit type.
B
g
e
d
c
f
A
EBBH/X11+16DF + EBVH/X11+16S(U)18+23DJ
Daikin Altherma 3 R F+W
4P643607-1 – 2021.09