Obtaining A "Session Id; Doing The Calibration For The Touch Screen - Kodak DirectView CR 825 Installation Instructions Manual

INSTALLATION INSTRUCTIONS
10MAR06

Obtaining a "Session ID"

II4825-1
Page
29 of 72
Important
You must have a "Session ID" for access to "Service Functions" and "Diagnostics".
1 Obtain a "Session ID", see SERVICE BULLETIN 843.

Doing the Calibration for the TOUCH SCREEN

1 From the main menu, click:
• [Key Operator Functions]
• [System Configuration]
• [Next]
• [Next]
• [Next]
• [Calibrate the Touch Screen]
2 Touch the TARGET when it moves to the 3 areas on the screen.
3 Does the cursor position change when you touch the TARGET?
a. Touch [YES].
b. Continue with
4 Touch [Main Menu].
Yes
a. Touch [NO].
Step 4. b. Do
c. If necessary, install a new
MONITOR.
No
Step 1 - Step 3 again.
Installation