Table of Contents
Advertisement
Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure the cables are firmly inserted.
•
In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page
•
The connection illustrations below are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
Monitor
(VGA)
1
1.
VGA cable
2.
VGA to DVI-A cable
3.
USB cable
4.
Component Video to VGA (D-Sub)
adapter cable
•
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate
a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook.
Press FN and the labeled function key simultaneously. Refer to your notebook's
documentation to find your notebook's key combination.
8). They are commercially available from electronics stores.
Notebook or desktop computer
(DVI)
3
1
7
2
or
A/V device
4
5
6
7
or
5.
S-Video cable
6.
Video cable
7.
Audio cable
7
Speakers
Connection
15
Advertisement
Table of Contents
