Table of Contents
Advertisement
Web screen configurations
User management screen [User mng.]
The users and personal computers (IP addresses) that
can access the unit from personal computers and mobile
terminals are registered in the User mng. screen [User mng.].
„ User authentication screen [User auth.]
„
Click the [User auth.] tab of User mng. screen [User mng.].
Configure the user authorization settings for the personal
computers and mobile terminals that can access the unit.
User auth.
User authorization is set to "Off" or "On" here.
Enter the setting using the [Set] button.
Factory settings: Off
Authentication
Specify the method of user authentication to use.
Setting value:
Basic
Use basic authentication.
Digest
Use digest authentication.
Factory settings: Basic
Notes
● If you change the Authentication setting, close the
browser and perform access again.
● When [User auth.] is set to [On], network connection
with the AW-RP50 will be disabled.
● When [User auth.] is set to [On] while
[Authentication] is set to [Digest], network
connection with the AW-RP50, AW-RP120, and
AK-HRP200 will be disabled.
88
(continued)
User name [1 to 32 half-size characters]
The user name is input here.
Enter the setting using the [Set] button.
● For details of usable characters, refer to page 66.
Password
Retype password [4 to 32 half-size characters]
The password is input here.
Enter the setting using the [Set] button.
Access level
Select one of the following settings as the user access
level.
Enter the setting using the [Set] button.
Setting value:
1. Administrator
2. Camera control
Factory settings: 2. Camera control
User check
A pull-down menu can be opened here, and the registered
users checked.
A registered user is indicated in the form of "Registered
user name [Access level]". (Example: admin[1])
To delete a registered user, select the user to be deleted,
and click the [Delete] button on the right.
Up to 9 users can be registered as users.
This access level allows the user to
perform all the unit's operations.
This access level allows only Live screen
operations to be performed.
Advertisement
Table of Contents
