Speaker Sound Output Selection (Dtv Mode); Time Settings - JVC LT-22E53B Instruction Manual

Mono sound selection
If the stereo signal is weak, you can switch to mono by pressing the AUDIO button. In mono reception, the clarity of sound is
improved. To switch back to stereo, press the AUDIO button again.
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to NICAM DUAL I, NICAM DUAL II, NICAM
DUAL I+II or MONO by pressing the AUDIO button repeatedly.
NICAM DUAL I
Sends the primary broadcast language to the loudspeakers
NICAM DUAL II
Sends the secondary broadcast language to the loudspeakers
NICAM DUAL I+II Sends the primary and secondary broadcast languages to the
loudspeakers

Speaker Sound Output Selection (DTV Mode)

While watching a DTV programme, you can press the AUDIO button to
display the audio language list (only applicable when the TV programme has
this feature).
Press the buttons to select an audio language or audio format if
available and then press the
L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the OK button to
confirm and exit.

Time Settings

Allows you to adjust power on / off time, sleep timer, auto standby and time zone.
1. Press the MENU button and then press the
TIME menu and then press the OK button.
2. Press the
buttons to select the following time options and then
press the OK button.
buttons to select sound track between
buttons to select the
Customising TV Settings
Audio Language
English
L R
Norsk
V.I. L R
OK
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Clock 10 Mar 2013 15:01
Off Time Off
On Time Off
Sleep Timer Off
TIME
Auto Standby (4 hours) On
Time Zone London GMT
5
GB
33