Connecting A Coaxial Audio Receiver; Connecting Headphones - JVC LT-22E53B Instruction Manual

Connections
3

Connecting a Coaxial Audio Receiver

GB
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable to connect the TV's SPDIF OUTPUT
socket to an external audio receiver's audio coaxial
input socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
which is located at the front right side under the
frame.
3. Press the
or on the remote control to turn on your TV.
4. Press the
or the INPUT button on the remote control to display
the Source List. Use the
control to select the desired input source and then
press the OK button to confirm.
The TV's volume will not be affected. You may
control the audio level via the Audio Receiver.

Connecting Headphones

Connect your headphones to the TV's HEADPHONE
socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly increase
the volume until you reach a comfortable listening level.
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme
volume when using headphones, especially for
extended periods.
16
button on the right side panel of the TV
button on the right side panel of the TV
buttons on the remote
Rear Bottom View of TV
Y Pb Pr
VIDEO L R
Audio Receiver
Rear Right Side View of TV
COMMON INTERFACE (CI)
USB HDMI2 HDMI1(ARC)
HEADPHONE
5V 500mA
Earphones Cable
(not included)
SPDIF OUTPUT
SCART
Audio Cable
(not included)
PC IN
PC AUDIO
RF