Table of Contents
Advertisement
Customising TV Settings
5
3. Press the
GB
setting.
Picture Mode
Colour
Temperature
Aspect Ratio
30
buttons to select the options. Press the OK button and then press the
Select among picture mode: Standard / Mild / User / Dynamic.
Alternative
You may press the P.MODE button to select the picture mode directly.
Contrast
Adjusts the difference between light and dark levels
in the picture (for User mode).
Brightness
Increases or decreases the amount of white in the
picture (for User mode).
Colour
Controls the colour intensity (for User mode).
Sharpness
Adjusts the level of crispness in the edges between
light and dark areas of the picture (for User mode).
Tint (For NTSC
Adjusts the balance between red and green levels
format)
(Tint is only available for NTSC signal reception).
Select among colour temperature: Medium / Cool / User / Warm.
Adjusts the colour components independently to achieve a warm or cool
colour (for User mode).
• Red:
Increases red tint
• Green:
Increases green tint
• Blue:
Increases blue tint
Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Full / Zoom / Subtitle /
SmartZoom.
Alternative
You may press the ASPECT button to select the aspect ratio directly.
Auto
This selection will display
the picture according
to the aspect ratio of
the input source. Black
bars will appear on both
the left and right of the
screen.
4:3
This selection will allow
you to view a picture with
an original 4:3 aspect
ratio. Black bars will
appear on both the left
and right of the screen.
16:9
This selection will allow
you to adjust the picture
horizontally, in linear
proportion, to fill the entire
screen.
Full
This selection will detect
(DTV mode, HDMI
the resolution of the HDMI
mode and YPbPr
signal and display an image
mode only)
with the same number of
pixels.
Input Signal 4:3
buttons to adjust each option's
Picture Mode
Standard
Contrast 82
Brightness 50
Colour 50
Sharpness 50
Tint 50
BACK
EXIT
Colour Temperature Medium
Red 40
Green 31
Blue 50
BACK
EXIT
Input Signal 16:9
This selection will display
the picture according to
the aspect ratio of the
input source.
This selection will allow
you to adjust the picture
vertically, in linear
proportion. Black bars will
appear on both the left
and right of the screen.
This selection will allow
you to view a picture with
an original 16:9 aspect
ratio.
This selection will detect
the resolution of the
HDMI signal and display
an image with the same
number of pixels.
MENU
MENU
Advertisement
Table of Contents
