Sony HDW-700A Operation Manual page 125

2
• To enable the write-protection function (the "ON" setting), turn
the MIC/MENU knob until the setting changes to ON, and then
push the MIC/MENU knob.
• To disable the write-protection function (the "OFF" setting), turn
the MIC/MENU knob until the setting changes to OFF, and then
push the MIC/MENU knob.
The question mark (?) changes back to the arrow (→) to confirm the
setting.
If data cannot be written
If one of the following error messages appears when you push the MIC/
MENU knob in step 5 of the procedure in the previous section (page 4-
68), then the data was not written.
Error message
NO CARD!
WRITE
PROTECTED!
CARD WRITE
ERROR(flashing)
Data write error messages
Reason
No setup card is inserted. Insert or reinsert the card.
WRITE PROTECT is set
to ON.
Circuit or card fault.
Chapter 4 Adjustments and Settings for Recording
Action
Set WRITE PROTECT to
OFF.
Check the circuitry, or replace
the card with a verified card.
4
4-71