Sony HDW-700A Operation Manual page 121

1
Set the VF DISP switch to MENU.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this MENU is first used,
the lowest page number of the previously selected will appear.)
2
Turn the MIC/MENU knob until the OPERATOR FILE page
appears, and then push the MIC/MENU knob.
<OPERATOR FILE>
m READ (CARDmCAM)
WRITE (CAMmCARD)
PRESET
PROTECT : OFF
: ππππππππππ
CARD ID
CAM CODE : HDW-700
DATE
: 1998/JAN/01
3
Move the arrow (→) until it points to WRITE(CAM→CARD) and
push the MIC/MENU knob.
"WRITE TO CARD?" appears. If no card has been inserted, the
message "NO CARD!" will appear. Insert a setup card.
OPERATOR FILE page
<OPERATOR FILE>
m READ (CARDmCAM)
WRITE (CAMmCARD)
PRESET
PROTECT : OFF
: ππππππππππ
CARD ID
CAM CODE : HDW-700
DATE : 1998/JAN/01
WRITE TO CARD?
Chapter 4 Adjustments and Settings for Recording
Reads data
Writes data
Reads user-preset data
Indicates write protection
function setting
Indicates card ID setting
4
(Continued)
4-67