3. Remove the microphone board bracket.
4. Reinstall the microphone board and bracket.
5. Reinstall all the removed parts, and then reconnect the cables.
G-sensor cards
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the panel housing assembly. See "Panel housing assembly" on page 77.
2. Remove two screws. Then, remove the G-sensor cards.
.
Chapter 6
Hardware removal and installation
79