Check Coolant Level - Hitachi ZAXIS 120-6 class Operator's Manual

Hydraulic excavator

Table of Contents

Check Coolant Level

1. Confirm that pilot control shut-off lever (1) is in the LOCK

2. Confirm that all control levers are placed in neutral.

3. Insert key switch (2). Turn it to ON position. Press and

hold switch (3) with the engine stopped.

Coolant indicator (4) must be displayed in green.

IMPORTANT: Do not rely only on the monitor display

for checking the machine conditions such as oil level;

visually check them yourself as required.

Always check the machine on a firm, level surface.

NOTE: If the security function is enabled, a password is

LOCK position