Table of Contents
Advertisement
Before Starting Engine
1. Ensure that the battery disconnect switch is in the ON
position.
2. Confirm that pilot control shut-off lever (1) is in the LOCK
position.
3. Confirm that all control levers are placed in neutral.
4. Insert key (2) to the key switch. Turn it to ON position.
Push and hold switch (3) with the engine stopped.
IMPORTANT: Always check the machine on a firm, level
surface. Never attempt to start the engine while
checking the machine.
If engine oil level alarm (4) (green) and coolant level
alarm (5) (green) are displayed, the engine status is
normal.
5. Adjust the seat to allow full control pedals and levers
stroke with operator's back against the backrest. Fasten
the seat belt.
f
NOTE: The monitor surface is a resin product. When the
surface becomes dusty, lightly wipe the surface with a wet
cloth. Never use an organic solvent.
OPERATING THE ENGINE
3-3
1
LOCK Position
2
3
4
5
MDAA-01-295
MDC1-01-502
MDCD-01-026
MDC1-01-041
Advertisement
Table of Contents
Troubleshooting
