Check Recovery Tank Coolant Level - Hitachi Zaxis 200LC Operator's Manual

Check Recovery Tank Coolant Level

With the engine cold, coolant level must be at the FULL
mark on the recovery tank (1).
If coolant is below the FULL mark, add coolant to the
recovery tank.
CAUTION: Prevent possible injury from hot
spraying water. DO NOT remove radiator filler
cap unless engine is cool. Then turn cap slowly
to the stop. Release all pressure before you
remove cap.
If recovery tank is empty, check for leaks. Repair as
required. Add coolant to the radiator and the recovery
tank.
NOTE: If recovery tank is full and radiator is low, check
for leaks in radiator cap and hose connections
between radiator and coolant recovery tank.
Coolant level in the radiator must be at bottom of the filler
neck.
Maintenance—Every 10 Hours or Daily
3-4-2
1—Recovery Tank
OUT1739,0000221 –19–05AUG02–1/1
081407
PN=118