Aerial Angle; Daily Checks Of Aerial Angle Camera Images - Hitachi ZAXIS 120-6 class Operator's Manual

Hydraulic excavator

Table of Contents

L. Aerial Angle

--- daily (Before Starting the Engine)

Method of Checking

1. Turn key switch (1) to the ON position.

2. Press screen changeover switch (3) and make sure the

image on main monitor (2) changes.

3. Bring up the image around the machine on main

monitor (2) and make sure that all the camera images are

depicted without any problems in terms of visibility.

 If an image is difficult to see, clean the camera(s)

and/or monitor to make the image clearer. Always

ensure good footing when cleaning the cameras.

 If the visibility fails to improve after cleaning the

camera lenses and monitor, or if there is a problem

like a missing image, consult your authorized dealer.

NOTE: The surfaces of monitor display (2) and the camera

lenses are made of plastic. When cleaning them, use a clean,

water-dampened cloth and wipe them gently. Never use an

organic solvent.

Image Around Machine

Troubleshooting