Lincoln Electric OERLIKON CITOTIG 315 AC/DC Operator's Manual page 24

Menu SMAW
To enter into Menu SMAW see section Menu, descriped above
Menu SMAW
Factory Configuration
Function
Arc Force
Hot Start
Stick Polarity
ARC FORCE and HOT START
With those two parameters, user can change the
behaviour of unit in STICK DC stick welding. See DC stick
welding for a better understanding of both features.
Setting is ignored for AC STICK or GTAW mode of
workin.
STICK POLARITY
With this function is possible to change polarity of the
electrode clamp without any change in work cables
connections. For default stick polairity is DC+.
English
Selectable Value
Default
SOFT: 35% 0 – 75% (step 1%)
CRISP: 75% 75 – 200% (step 1%)
SOFT: 30% 0 – 75% (step 1%)
CRISP: 50% 50 – 200% (step 1%)
DC+
Displayed
Range parameter name
FRCE
HSTR
STPL
DC+ or DC-
22
Displayed value
Current selected value
(%)
Current selected value
(%)
Current selected value
(-)
English