Setting The Tv On The Wall; Optional Accessory - Sharp AQUOS LC-70LE733U Operation Manual

Appendix

Setting the TV on the Wall

CAUTION
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service professional about using an optional AN-52AG4 bracket to mount the TV on the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting
• Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the
wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4 locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
■ LC-70LE733U
1
1

Optional Accessory

The listed optional accessory is available for the Liquid
Crystal Television. Please purchase them at your nearest
shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
70
Angular mounting
2
About setting the TV angle
AN-52AG4 LC-70LE733U
• The center of the display:
0/5°
5
/
position.
LC-60LE633U
• The center of the display:
23
position.
• Refer to the operation manual of
AN-52AG4 for details.
■ LC-60LE633U
1
1
2
Part name
Wall mount
AN-52AG4
bracket
inch (8.0 mm) under the "c"
16
/ inch (18.0 mm) under the "e"
32
Model number