Appendix; Setting The Tv On The Wall - Sharp AQUOS Operation Manual

sharp operation manual
>>

Appendix

<<

Setting the TV on the Wall

For the screws, refer to the table shown below.
Standard screws
Length(Depth of mounting holes)
Quantity
NOTE
• To use this TV mounted on a wall, remove the cable tie as needed.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV.
• Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.
• SHARP is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Do not install the wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.
file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/9-1.html?next
Unit: inch
(mm)
80/70/60 inch models
M6 (Use 1.0 pitch screws.)
25/64 (10)
4 pcs.
ENG 9-1
Page 1 of 1
2020/3/25