Internet Setup; Using The Internet - Sharp AQUOS LC-70LE733U Operation Manual

Using the Internet

Internet Setup

Example
Initial Setup
EZ Setup
Broadcasting Setup

Internet Setup

Language
[English]
®
DivX Setup
Connection Type
1
Press MENU to display the MENU screen, and then
press c / d to select "Initial Setup".
Press a / b to select "Internet Setup", and then
2
press ENTER.
Press a / b to select "Network Setup", and then
3
press ENTER.
Press a / b to select "Connection Type", and then
4
press ENTER.
Press c / d to select "Wired" or "Wireless", and
5
then press ENTER.
• If you select "Wired", the signal is detected and setup
is performed automatically. Use "IP Setup" to check
and change the settings as necessary. (See page 61.)
• If you select "Wireless", use "Wireless Setup" to
confi gure the access point settings.
Wireless Setup
If your access point supports Wi-Fi Protected Setup
(WPS), it is recommended that you use this function
for the wireless connection. You can press the WPS
button on the access point to confi gure the settings
automatically.
• The name of the WPS button function may differ depending
on the access point. See the operation manual of the
access point for details.
1
Confi rm the current settings in "Connection Type".
• If "Wired" is selected, press c / d to select "Wireless".
Press a / b to select "Wireless Setup", and then
2
press ENTER.
• Confi rm the settings. If each setting item is correct,
press MENU to exit.
• If you are confi guring the wireless setup for the fi rst
time or changing the settings, go to step 3.
Press c / d to select "Change", and then press
3
ENTER.
Press a / b to select "WPS", and then press
4
ENTER.
• To select and register an access point manually, select
"Search" or "Manual Setup" and make the necessary
settings.
60
Press a / b to select "Push button", and then press
5
ENTER.
• To confi gure the setting via PC, select "PIN code".
Follow the on-screen instructions and the operation
manual of the access point to confi gure the settings.
6
Select "Next" to complete the settings.
• The connection process starts and the WPS button on
the access point can be pressed.
7
Press the WPS button on the access point.
• Pressing the WPS button displays a confi rmation
screen. Please wait until a connection is established.
8
When a connection is established, the connection
details are displayed. Press ENTER.
Interactive Service
If you do not want other people to connect to the
Internet in your absence, you can make settings to
keep the TV away from the Internet.
1
Press MENU to display the MENU screen, and then
press c / d to select "Initial Setup".
Press a / b to select "Internet Setup", and then
2
press ENTER.
Press a / b to select "Interactive Service", and then
3
press ENTER.
• Input the 4-digit secret number by using
Press c / d to select "No", and then press ENTER.
4
• If you want to allow Internet connection, select "Yes",
ENTER
and then press
5
Press MENU to exit.
Checking Your Internet Connection
Press AQUOS NET once or twice to switch to the
TV+Web or Web screen.
• If " " is displayed after you connect to the Internet,
check your TV's network settings and connection.
• When the original home page appears, now you are
connected to the Internet.
• You can also display the AQUOS NET screen by pressing
FAV APP on the remote control unit. See page 34 for
details on the FAV APP key Assign function.
• If you have failed to connect to the Internet in the above
operation, then an error message will appear. In this case,
press EXIT to return to the normal TV screen and check
the relevant settings (see page 61).
• If you still cannot connect to the Internet, please consult
your Internet service provider or telephone company.
• When an application is used, you cannot make settings for
"Internet Setup".
If you need to make the settings of "Internet Setup", press
EXIT to return to the normal TV screen.
0 - 9 .
.