Table of Contents
Advertisement
Description of functions
The following functions are available on
your ventilation hood, depending on the
model:
Extraction mode
The air is drawn into the ventilation
hood. It is then cleaned by the edge
extraction panels and the grease filters
and directed outside.
Non-return flap
A non-return flap installed in the vent
system ensures that when the
ventilation hood is not in operation, the
duct is closed and no exchange of
room and outside air can take place.
The flap is closed when the ventilation
hood is switched off.
When the ventilation hood is switched
on, the non-return flap opens for the
cooking vapors to be blown directly
outside.
In case the on-site vent system does
not have a non-return flap, one is
supplied with the ventilation hood. It
must be installed in the exhaust socket
on the motor unit.
12
Recirculation mode
(Only DA 6596 D requires a
Recirculation kit and OdorFree Charcoal
Filter (available as optional
accessories); see "Technical data" for
more information.)
The air is drawn in and cleaned first by
the edge extraction panels and the
grease filters, and then by an OdorFree
Charcoal Filter. The cleaned air is then
recirculated back into the kitchen.
Advertisement
Table of Contents
