Table of Contents
Advertisement
Cleaning and care
Grease filters and panel for
edge extraction
Fire hazard
An oversaturated grease filter is a fire
hazard.
Clean the grease filter at regular
intervals.
The edge extraction panel and the re-
usable metal grease filter in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
The grease filter and the panel must be
cleaned at regular intervals.
A heavily soiled grease filter hinders
air extraction and will lead to
increased levels of soiling in the
cooker hood and in the kitchen.
Cleaning interval
Accumulated grease solidifies over a
longer period of time and makes
cleaning more difficult. The grease
filter(s) should therefore be cleaned at
least every 3 to 4 weeks.
The filter operating hours control
reminds you to regularly clean the
grease filters by illuminating the grease
filter symbol .
You can set the operating hours counter
interval to suit the type of cooking you
do (see "Operation (Automatic and
Manual modes)").
34
Removing the panel and grease
filters
The panel and grease filter can
fall out when you are handling them.
This can result in damage.
Make sure you hold the panel and
the grease filter securely at all times
when handling them.
Pull the panel out of the holder at the
bottom, press it back a little at the
top , then unhook it and carefully lift it
out.
Hide quick links:
Advertisement
Table of Contents
