Table of Contents
Advertisement
Safety precautions
Getting started
WARNING
∫ Unit
≥To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this
unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
– Do not let metal objects fall inside this unit.
– Do not place heavy items on this unit.
∫ AC mains lead
≥To reduce the risk of fire, electric shock or product damage,
– Ensure that the power supply voltage corresponds to the voltage
printed on this unit.
– Insert the mains plug fully into the socket outlet.
– Do not pull, bend, or place heavy items on the lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when disconnecting the plug.
– Do not use a damaged mains plug or socket outlet.
≥The mains plug is the disconnecting device. Install this unit so that
the mains plug can be unplugged from the socket outlet
immediately.
CAUTION
∫ Unit
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may
result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles, on
this unit.
≥ This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile telephone.
≥ This unit is intended for use in moderate climates.
∫ Placement
≥ Place this unit on an even surface.
≥ To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
– Do not obstruct this unit's ventilation openings with newspapers,
tablecloths, curtains, and similar items.
– Do not expose this unit to direct sunlight, high temperatures,
high humidity, and excessive vibration.
∫ Batteries
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ Mishandling of batteries can cause electrolyte leakage and may
cause a fire.
– Do not mix old and new batteries or different types at the same
time.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
– Remove batteries if you do not intend to use the remote control
for a long period of time. Store in a cool, dark place.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
CLASS 1
LASER PRODUCT
VQT4W64
2
(Inside of product)
supplied accessories
Please check and identify the supplied accessories.
(Product numbers correct as of February 2013. These
may be subject to change.)
∏
1
Remote control
(N2QAYB000471)
1
AC mains lead
∏
For use with this unit only. Do not use
it with other equipment.
Also, do not use cords for other
equipment with this unit.
1
RF coaxial cable
∏
2
Batteries
∏
for remote control
The remote control information
∫ Batteries
Insert so the poles (i and j) match those in the remote control.
R6/LR6, AA
≥Use alkaline or manganese batteries.
≥Remote control operations (
∫ Use
Remote control signal sensor
20
20
30
30
7 m directly in front of the unit
The distance and angles are an approximate.
4)
Advertisement
Table of Contents
