Customer Menu - U-Line U-3036WCWCS-00B User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
ERROR NOTIFICATION
The 3000 model series continuously monitors a series of
inputs and parameters to ensure proper and efficient
operation of your unit. Should the system detect a fault,
an error notification will be displayed on the user
interface. See below for a list of errors.
NOTE: Singe zone models will not use (L) left or (R) right
zone indicators in error notification.
ID Description
No Comm Unit lost
communication to
the display.
(L) (R) Zone T Left or right zone
Open thermistor circuit
open.
Amb Thrm Ambient thermistor
Open circuit open.
(L) (R) Zone T Left or right zone
Short thermistor circuit
shorted.
Amb Thrm Ambient thermistor
Short circuit shorted.
(L) (R) Temp Hi Left or right zone
6H+ temperature +10°
over set point for
over 6 hours.
(L) (R) Temp Hi Left or right zone
12H+ temperature +10°
over set point for
over 12 hours.
(L) (R) Temp Lo Left or right zone
6H+ temperature -10°
under set point for
over 6 hours.
(L) (R) Temp Lo Left or right zone
12H+ temperature -10°
under set point for
over 12 hours.
(L) (R) Door Left or right door
Open 5M switch open for more
then 5 minutes.
Solution
Disconnect and
reconnect power to
unit. Contact
Customer Care if
persistent.
Contact Customer
Care.
Contact Customer
Care.
Contact Customer
Care.
Contact Customer
Care.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
23

CUSTOMER MENU

The 3000 Series of U-Line undercounter refrigeration
appliances contains a feature rich customer menu. The
Customer Menu allows access to a series of advanced
features including Energy Saver Mode, Sabbath Mode,
actual temperature readings as well a method to restore
factory defaults.
3000 SERIES - CUSTOMER MENU
Up
Down
6. To access the Customer Menu hold
7. Press or to scroll through available selections.
8. Press to enter selected sub-menu.
9. To exit Customer Menu, press
bottom of the display and press
Select
WELCOME TO THE
CUSTOMER MENU. USE
UP/DOWN ARROWS TO
SCROLL SETTINGS.
for 5 seconds.
to scroll to the
to select "Exit".
Control Operation 4