U-Line 3000 Series Installation Manual
Flange kit requirements and instructions for custom 36 inch and 90 cm
Hide thumbs
Also See for 3000 Series:
- User manual & service manual (67 pages) ,
- User manual (46 pages) ,
- Use and care manual (24 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for U-Line 3000 Series
Summary of Contents for U-Line 3000 Series
- Page 1 INSTALLATION GUIDE ® 3000 Series: Flange Kit Requirements and Instructions for Custom 36 inch and 90 cm Models U-3000FLANGE-KIT -ICE U-3000FLANGE-KIT ALL MODULAR 3000 MODELS ARE INTENDED FOR BUILT -IN INSTALLATIONS ONLY U-LINE.COM The American Built-In Undercounter Leader Since 1962...
- Page 2 3045 Ice Machine MUST be a right-hand door swing (-00 model) CAUTION and installed on the right side only. Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage. u-line.com...
- Page 3 Figure 1 Grille Screw Locations 2. Slide grille forward, pushing tabs in, to remove grille. Barbed Push Rivet Figure 2 Grille Removal Figure 3 Pulling Down on the Cord Catcher CAUTION To avoid damage to the cord catcher, use care when removing. u-line.com...
-
Page 4: Door Removal
To avoid damage to the unit, place the door near the unit. The door is connected to the unit with a cord. Use care when moving. 4. Place door by unit. 5. Completely remove (2) previously loosened slotted screws. Figure 4 Hinge Cover Removal u-line.com... -
Page 5: Frame Removal
2. Remove frame by pulling forward. 3. Use these same instructions (3 – Remove the Door and Frame starting on page 2) to remove the door and frame of the other unit. Figure 7 Middle Panel Rivet Locations 3. Remove panel by pulling forward. u-line.com... - Page 6 1. Wipe down unit to remove any grease that may prevent the double sided tape (pre-installed) to adhere. 2. Peel back adhesive tape backing from Flange Kit. Figure 9 Units Placed Side-by-Side Adhesive tape Figure 11 Adhesive Tape (U-3000FLANGE-KIT -ICE shown) u-line.com...
-
Page 7: Frame Installation
2. Using the located holes as a template, drill (2) holes with a #30 drill bit. 3. Slide tongue (left side) of panel under the new frame and align stamped holes with drilled holes. 4. Install (2) Phillips sheet-metal screws supplied. u-line.com... -
Page 8: Product Information
Models, Refrigerator / Freezers, Refrigerators, Drawer Models and Beverage Centers. The U-Line brand offers products in the 1000 Series, 2000 Series and the Modular 3000 Series. The 1000 Series offers a more targeted priced product with appropriate features, while the 2000 Series offers upscale features, advanced technology and specialized product families.