U-Select ® Control - U-Line U-3036WCWCS-00B User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
®
U-SELECT CONTROL
Digital Display
The 3000 Series units are controlled by a feature rich,
advanced OLED display control unit. The control panel
allows adjustment to temperature set point, access to
Energy Saver Mode, internal temperature readings, and
many other features.
Zone Control
Your model has a single control module for both zones.
Each side of the control refers to a specific zone.
Adjusting Temperature Settings
Up
WHITE WINE
4 4 9 9 F F
Can be displayed in Celsius
Down
Each zone has a series of Mode Settings with a default
value for each setting. Each Mode Setting can be further
customized by fine tuning the temperature set point. See
the chart below for a description of each mode and mode
temperature ranges. Mode selection will vary by model.
Mode Settings Chart
Setting Default °F (°C)
Red Wine 55 (12)
White Wine 50 (10)
Sparkling Wine 45 (7)
Beverage/Drinks 38 (3)
Market/Fresh 38 (3)
Root 50 (10)
Pantry 42 (5)
Deli 36 (2)
Many food types have an optimum storage temperature.
Storing your food properly will help maintain its freshness
and flavor. The Food Storage Chart contains food types
and their respective optimum storage temperatures.
Zone Toggle
Display
Select
WHITE WINE
O O O O
5 5 0 0 F F
Power
U-Select Lighting
Range °F (°C)
55 - 65 (12 - 18)
45 - 55 (7 - 12)
38 - 50 (3 - 10)
34 - 65 (1 - 18)
34 - 40 (1 - 4)
45 - 55 (7 - 12)
34 - 70 (1 - 21)
34 - 40 (1 - 4)
Food Storage Chart
Mode Food Types
Deli Meats, Fish, Cheeses, Dairy, Butter, Garlic,
Oils, Nuts, Condiments
Market/Fresh Fruits, Vegetables, Berries, Lettuce
Pantry Dry Goods, Breads, Baking Items, Spices,
Seasonings
Root Root Vegetables, Potatoes, Onions, Lemon,
Lime, Melon, Peppers, Beans, Cucumber, Cut
Vegetables
Each zone may have its own mode and set point.
Available Mode Settings will vary with model.
1. In order to adjust temperatures, you must first select a
zone to adjust. To select a zone, press
side Mode Setting will flash. Pressing
select the right side, and the right side Mode Setting
will flash. For 3018 Models simply press
Mode Settings.
2. Pressing will cycle through the available modes for
your model. Reference the Mode Settings Chart for
each setting's default set point and range.
3. Once your have selected your desired mode the default
set temperature will display. You may further fine tune
the temperature by pressing
21
. The left
again will
to alter
or .
Control Operation 2