Volvo XC40 2019 Owner's Manual page 505

CAUTION
When not in use, the jack* should be
•
kept in its storage compartment under
the cargo compartment floor.
The jack provided with your vehicle is
•
intended to be used only in temporary
situations such as changing wheels in
the event of a flat tire. Only the jack
that came with your particular model
should be used to lift the vehicle. If the
vehicle needs to be lifted more fre-
quently or for a prolonged period, using
a garage jack or hoist is recommended.
Always follow this device's instructions
for use.
Removing a wheel
Read through all instructions before starting.
Before raising the vehicle using a jack or lift,
take out all the tools you will need.
1. Turn on the vehicle's hazard warning
flashers if a wheel change must be per-
formed in an area with traffic.
2. Using the lug wrench, screw the towing
eye into place as far as possible.
3. Remove the plastic covers from the wheel
bolts using the designated tool.
4. With the vehicle still on the ground, use
the lug wrench/towing eye to loosen the
wheel bolts ½-1 turn by pressing down-
ward (counterclockwise). Always start
with the locking wheel bolts*.
5. Follow the instructions for safely lifting the
vehicle using a jack.
6. Raise the vehicle until the wheel to be
changed can move freely. Unscrew the
wheel bolts and lift off the wheel.
Installing a wheel
1. Clean the contact surfaces between the
wheel and the wheel hub.
WHEELS AND TIRES
2. Lift the wheel into place. Tighten the
wheel bolts securely.
Do not grease the wheel bolt threads.
3. Lower the vehicle so that the wheel can-
not rotate.
4. Tighten the wheel bolts in a crisscross pat-
tern (as shown in illustration). It is impor-
tant that the wheel bolts are securely
tightened. Tighten to 140 Nm (103 ft. lbs.).
Use a torque wrench to check torque.
5. Press the plastic covers onto the wheel
bolts.
6. Check the tire inflation pressure and store
the new inflation pressure in the tire pres-
sure monitoring system*.
* Option/accessory.
}}
503