Volvo XC40 2019 Owner's Manual page 162

WINDOWS, GLASS AND MIRRORS
||
The rearview mirror has two sensors - one
pointing forward and one pointing rearward -
which work together to identify and eliminate
glare. The forward-pointing sensor monitors
ambient light, while the rearward-pointing
sensor monitors light from the headlights of
following vehicles.
For the door mirrors to be equipped with auto-
dim, the rearview mirror must also be equip-
ped with auto-dim.
NOTE
If the sensors are obstructed by e.g. a
parking permit, transponder, sunshade or
objects on the seats or in the cargo com-
partment in a way that prevents light from
reaching the sensors, the auto-dim func-
tion in the door and rearview mirrors will
be reduced.
Related information
Rearview/door mirrors (p. 159)
•
Adjusting the door mirrors (p. 160)
•
160
Adjusting the door mirrors
To improve visibility to the rear, the door mir-
rors need to be adjusted to the driver's height
and seating position.
There are several automatic settings that can
also be connected to the memory function
buttons for the power seat*.
Controls used for door mirrors
Door mirror controls.
The joystick in the drivers' door control panel
is used to adjust the position of the door mir-
rors. The ignition must be in at least mode I.
1. Press the L button for the left door mirror
or R for the right door mirror. The button
will light up.
2. Adjust the position using the joystick
located between the buttons.
3. Press the L or R button again. The light in
the button will go out.
Automatically folding door mirrors*
The door mirrors can be automatically folded
when driving or parking in tight spaces.
1. Press the L and R buttons at the same
time.
2. Release the buttons after about 1 second.
The mirrors will automatically stop when
they are completely folded in.
Open the mirrors by pressing L and R at the
same time. The mirrors will automatically stop
when they reach the last-used setting.
Resetting the mirrors' position
A mirror that has been moved out of position
manually (e.g. hit or bumped into) must be
electrically returned to its original position for
automatic folding* to function properly.
1. Fold in the mirrors by pressing the L and R
buttons at the same time.
2. Open them again by pressing the L and R
buttons at the same time.
3. Repeat the above procedure as needed.
The mirrors return to their original positions.
* Option/accessory.