Volvo XC40 2019 Owner's Manual page 374

STARTING AND DRIVING
Activating and deactivating Auto-
hold at a standstill
The Auto-hold brake function at a standstill is
activated with the button in the tunnel con-
sole.
Press the button in the tunnel console to
–
activate or deactivate the function.
> The indicator light in the button will illu-
minate when the function is activated.
The function will remain active the next
time the vehicle is started.
When shutting off
If the function is active and holding
the vehicle stationary using the nor-
mal brakes (A symbol lit in the
instrument panel), the brake pedal
must be depressed while pressing the button
in order to deactivate Auto-hold.
372
The function will remain off until it is reac-
•
tivated.
When Auto-hold is switched off, Hill Start
•
Assist (HSA) will remain active to help
prevent the vehicle from rolling backward
when starting up a hill.
Related information
Auto-hold brakes (p. 371)
•
Hill Start Assist
The function for assisting when starting the
4
vehicle on inclines (HSA ) helps prevent the
vehicle from rolling backward when starting
on an uphill gradient. When backing up a hill,
HSA helps prevent the vehicle from rolling
forward.
The function retains pressure from the brake
pedal in the brake system for several seconds
after the brake pedal has been released.
This temporary braking effect is released after
a few seconds or when the driver begins driv-
ing.
Hill Start Assist is available even when the
Auto-hold brake function is switched off.
Related information
Auto-hold brakes (p. 371)
•
Brakes (p. 365)
•