Volvo XC40 2019 Owner's Manual page 273

Cruise control
Cruise Control (CC 32 ) can help the driver
maintain an even speed to provide a more
relaxing driving experience on highways and
long, straight roads with even traffic flows.
Function buttons and symbols
: Activates Cruise Control from
standby mode and resumes the set speed
: Increases the set speed
: From standby mode – activates
Cruise Control and sets the current speed
: From active mode – deactivates/
puts Cruise Control in standby mode
: Reduces the set speed
32 Cruise Control
33 Adaptive Cruise Control
Marker for set speed
The vehicle's current speed
Set speed
NOTE
In vehicles equipped with Adaptive Cruise
33
Control*(ACC ), it is possible to switch
between Cruise Control and Adaptive
Cruise Control.
DRIVER SUPPORT
WARNING
The function is supplementary driver
•
support intended to facilitate driving
and help make it safer – it cannot han-
dle all situations in all traffic, weather
and road conditions.
The driver is advised to read all sec-
•
tions in the Owner's Manual about this
function to learn of its limitations,
which the driver must be aware of
before using the function.
Driver support functions are not a sub-
•
stitute for the driver's attention and
judgment. The driver is always respon-
sible for ensuring the vehicle is driven
in a safe manner, at the appropriate
speed, with an appropriate distance to
other vehicles, and in accordance with
current traffic rules and regulations.
Using engine braking instead of
applying the brakes
Cruise Control regulates speed by lightly
applying the brakes. On downgrades, it can
sometimes be desirable to roll a bit faster and
let speed be reduced instead by engine brak-
ing alone. The driver can temporarily disen-
gage the Cruise Control braking function.
* Option/accessory.
}}
271