Using The Report Menu - ADC H4TU-C-231-L1 User Manual

LTPH-UM-1138-02, Issue 2
U R
SING THE EPORT
The Report menu (Figure
remote units which can be downloaded to a file for analysis or future reference.
four types of reports provided by the Report menu.
To select each individual report, do the following:
O
1 Press to select Report menu.
SPACEBAR
2 Press the
—
Continuous Print Mode generates a non-stop version of the report.
—
Page Mode generates a page-by-page version of the report for easy viewing on the screen.
3 Use your terminal emulation software (HyperTerminal or Procomm) to capture the selected report to your
printer. Press ENTER
4 End the captured report.
CTRL R
5 Press +
Monitor Performance
Report Type :
Print Mode
Please select report type and print mode by pressing <Space>,
terminal logging and press <Enter> to generate the report.
ID: xxxx—-xxxx—-xxxx--xxxx
H4TU-C-231 List 1
M
ENU
26) provides screens containing status and performance monitoring data for line and
to select a report and print mode.
to generate. (If Page Mode is selected, press the
to refresh the Report menu screen.
Event Log Config
Full Report
: Continuous
01/04/2002 12:30:01
Figure 26. Report Menu - Full Report
September 12, 2003
Monitoring System Activity and Performance
Table 14 on page 42
SPACEBAR
Inventory Report Rlogon
then start
H4TU-C
describes the
to continue or to quit.)
ESC
Help
System: OK_
41