Follett Symphony Plus 110FB425A Operation And Service Manual page 6

Ice and water dispensers
Hide thumbs Also See for Symphony Plus 110FB425A:
Table of Contents

Advertisement

Fig. 1 – Rear connections, freestanding models
12.25 " (31.2 cm)
4.75 " (11.9 cm)
4.5 " (11.4 cm)
3.75 " (9.3 cm)
2.75 " (6.8 cm)
10. Remove top front cover by removing two screws at bottom corners of cover. Lift cover slightly and pull
forward.
11. If dispenser is equipped with SensorSAFE™, remove protective plastic coating from dispense sensor
labels.
12. Turn on dispenser power and bin signal rocker switches. Check dispenser and ice machine operation.
13. Clean ice machine according to instructions in the Cleaning section. Discard ice made during cleaning
process.
14. Turn off ice machine bin signal switch.
15. Remove dispenser hopper lid; clean dispenser according to instructions.
16. Turn ice machine bin signal switch on and replace front covers, securing with screws.
6
110CT425A/W, 110FB425A/W
access panel
3/4" MPT drain
3/8" FPT condenser inlet location
3/8" FPT
(water-cooled only)
water inlet
3/8" FPT condenser outlet location
(water-cooled only)
9.62" (24.4 cm)
3/4" MPT ice machine drain location
power cord
NEMA 5-15
31.5" (80 cm)
14" (35.7 cm)
12.38" (31.4 cm)
33.75" (85.8 cm)

Advertisement

Table of Contents
loading

Table of Contents