Maintenance And Cleaning Safety; Lighting Safety; Uv Function Safety - Beko B5T68248 User Manual

1.7 Maintenance and cleaning safety

• Do not wash the product by spraying or pouring water on it. Do not use
a pressure cleaner, steam cleaner, hose or pressurised gun to clean the
product.
• Do not use sharp or abrasive tools to clean the product.
• Do not use materials such as household cleaning agents, soaps,
detergents, gas, gasoline, alcohol, wax, etc. to clean the product.
• The fibre filter shall be regularly cleaned. After each drying cycle, clean
the fibre filter and the inner surface of the loading door.
• Clean the fibre accumulation on the fins of the evaporator behind the
filter drawer with a vacuum cleaner. You can clean by hand, provided
you wear protective gloves. Do not try to clean with bare hands.
Evaporator fins may damage your hands. (For products with heat pump)
• Due to fire and explosion hazard, do not use solutions, cleaning
materials, steel wool or similar materials and tools to clean sensors.
• Clean the flue. (for models with flue)
• Do not drink the condensed water.

1.8 Lighting safety

• Contact an authorized service when you need to replace the LED/bulb
using for lighting (for products with lighting).

1.9 UV Function safety

• Applicable to products with UV feature.
• Use of the product except for its purpose and damage to the UV-C
lamp protection glass or surrounding may cause dangerous UV-C
radiation to occur. UV-C radiation can damage the eyes and skin even in
low doses. Do not operate the damaged product. (UV-C)
• Do not put anything other than textile products in the UV Hygiene
programs. Check that the textile products you will put are suitable for
drying in the dryer. (UV-C)
Dryer / User manual 11