Table of Contents
Advertisement
Using Your Vacuum
For additional ways to use your vacuum's features, check out BISSELL.ca/support.
1.
2.
Turn power ON. Turn the
Step gently on base and pull
Brush Roll ON for carpet
the handle back to recline.
cleaning and the light switch
Note: The Brush Roll
will illuminate. Turn the Brush
automatically shuts OFF when
Roll OFF when vacuuming
vacuum is locked in upright
hard or delicate surfaces like
position. Recline to reactivate.
hardwood, tile, small rugs, or
frieze carpets with long fibers.
Above Floor Cleaning
Visit BISSELL.ca/support to see all the ways you can use your vacuum's tools.
1.
2.
Clean hard-to-reach
The Stretch Hose can be
spaces with the Quick Release
removed from the extension
Extension Wand. Push the
wand. To do so, twist circular
release button to remove and
hose cuff counter-clockwise
attach desired tool.
and remove from Handle.
4.
Replace the wand by sliding
into place until you hear a
"click". Reattach Hose to
Handle if needed.
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
4 BISSELL.ca
3.
Use the Carpet Type Control
for optimized cleaning on high
pile and low pile carpet. The
control can be moved to the
middle position for medium
pile carpeting.
3.
Attach desired tool.
Note: For optimal use, attach
the Pet TurboEraser® Tool
directly to the Hose instead of
the wand.
Advertisement
Table of Contents
