Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint WMYL 7151

  • Page 1: Table Of Contents

    Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal WMYL 7151 Opening the porthole door manually Description of the washing machine and starting a wash cycle, 8-9 Control panel Indicator lights...
  • Page 2: Installation

    Installation 2. If the floor is not perfectly level, compensate ! Keep this instruction manual in a safe place for any unevenness by tightening or loosening for future reference. Should the appliance be sold, transferred or moved, make sure the the adjustable front feet (see figure);...
  • Page 3: Connecting The Drain Hose

    Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washing ding it, to a draining machine’s plug.
  • Page 4: The First Wash Cycle

    As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
  • Page 5: Technical Data

    Technical data Model WMYL 7151 width 59.5 cm Dimensions height 85 cm depth 54 cm Capacity from 1 to 7 kg Electrical please refer to the technical connections data plate fixed to the machine maximum pressure 1 MPa (10 bar)
  • Page 6: Care And Maintenance

    Care and maintenance Cutting off the water and electri- 2. unscrew the lid city supplies by rotating it anti- clockwise (see figu- re): a little water may • Turn off the water tap after every wash cycle. trickle out. This is This will limit wear on the hydraulic system inside perfectly normal;...
  • Page 7: Precautions And Tips

    Precautions and tips ronment. The crossed out “wheeled bin” symbol on the This washing machine was designed and constructed in product reminds you of your obligation, that when you accordance with international safety regulations. The fol- dispose of the appliance it must be separately collected. lowing information is provided for safety reasons and must Consumers should contact their local authority or retailer therefore be read carefully.
  • Page 8: Description Of The Washing Machine And Starting A Wash Cycle

    Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights SPIN SPEED knob DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE button with indicator light FUNCTION Detergent dispenser drawer buttons with indicator lights WASH CYCLE knob Detergent dispenser drawer: used to dispense...
  • Page 9: Indicator Lights

    Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door.
  • Page 10: Wash Cycles

    Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) CLEAN Plus 1 Anti Stain 40° 1150 180’   2 Whites 60° 1150 180’   60° 1.23 52.5 195’ Cotton Standard 60° (1): heavily soiled whites and resistant colours. 1150 ...
  • Page 11: Personalisation

    Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
  • Page 12: Detergents And Laundry

    (*). Deter- best possible care. gent should only be poured into Wool: the wool wash cycle on this Hotpoint machine has the compartment 1. been tested and approved by The Woolmark Company for washing wool garments labelled as hand washable...
  • Page 13: Troubleshooting

    Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Possible causes / Solutions: Problem: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on.
  • Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
  • Page 15: Assistance

    OR NON-DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
  • Page 16: After Sales Service

    Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk...

Table of Contents