Corega CG-WLAPGMN User Manual page 35

* Once you forget the password or want to return to initial status,
please run this function.
* Details please refer to [chapter 5. FAQ-Q6].
Q7. How to get the latest firmware?
Ans: Please go to http://www.corega-asia.com, =>click supports
>download >select "firmware" , =>select and click the model which you
want to upgrade. If you upgraded failure, you may restore the utility
system to factory default settings, please refer Q6.
Q8. How to check the network setting?
Ans: If you want to check the IP address and subnet mask or Mac
address, you may following steps:
<Windows Me/98/95>
(1) Press [Start] of the system tray => select [Perform].
(2) Enter "winipcfg" in the blank bar=>press [OK].
(3) Select the name of WLAN adapter, then it will show up the
information regarding the networking setting. If it display error
information, =>please press [Release], => Press [Update].
<Windows XP/2000 >
(1) Press [Start] -> [Programs]-> [Accessories]->[Command Prompt].
(2) Enter "ipconfig /all" => press[Enter], then you will see the
networking setting. If it display error information, please enter
"ipconfig /renew"=> press [Enter].
WLAPGMN User Manual
33 33