Corega CG-WLAPGMN User Manual page 34

WLAPGMN User Manual
fire glass wall or door. It is to say to avoid the barriers between
WLAPGMN and Wireless LAN adapter.
2. Shorten the distance between WLAPGMN and WLAN adapters.
3. Adjust the antenna direction.
Q4. How to set/change the id and password for Utility Program?
Ans: In utility program, Click[Advanced]->[Management]-
>[Administration], Setting the id and password.
Q5. Forgot the Passowrd.
Ans: Recommanded to initial the product setting, which method
described as next question. Once you initial the product, all settings will
return to factory default settings.
Q6. How to resore to the default value?
A: There are 2 ways to restore:
<Press the [Init] button on main unit >
On the powering on status of WLAPGMN =>find the [Init] button on
the back of the main unit=>press it for 5 seconds around =>once the
[LAN] and [WLAN] LED are off, release it => few seconds later, you'll
see [LAN] and [WLAN] LED blank =>system has been restored to
factory default settings.
<Restore by utility>
1. Click[Advanced]->[Maintaince]->[Restore System]->system will
restore to Factory Default Settings.
2. It will show up the Saving screen, severl seconds later, it will return
to to re-login screen.
32 32