Corega CG-WLAPGMN User Manual page 21

Wireless108m access point
Table of Contents

Advertisement

Beacon Interval
(20-1000)
DTIM (1-255)
Fragmentation
Length (256~2346)
RTS Length
(256~2346)
Transmit Power
Super Mode
Radio Wave
eXtended Range
* Note: If any setting has been changed, you have to click [Reboot]-
>[Restart] to save the changes.
<Security Setttings>
A. Setting WEP
1. Click[Advanced]->[Configuration]->[Security Settings]->select
[Shared Key] from [Authentication] tab->setting [Key Table], once
configure completed, click [Apply].
Default is [100], recommanded don't change it.
Default is [1], recommand don't change it.
Enter even numbers.
Default is [2346], recommanded don't change it.
Default is [2346], recommanded don't change it.
Default is [full].
If your Wireless LAN Card supports Super G Mode transmit
rate.You can use this function to increase wireless through-
put. Default is [Disabled].
Default is [On].
Default is [Disabled].
WLAPGMN User Manual
19
19

Advertisement

Table of Contents
loading

Table of Contents