Capture Modes - Moultrie MCG-13271 Instructions Manual

C

CAPTURE MODES

Setting Capture Mode
Use the Up/Down buttons to choose between operating modes. This camera has 3 modes.
1. Motion Detect - Capture photo or video when motion or heat is detected.
2. Time Lapse - Capture photo at periodic intervals based on the Time Lapse program setting.
3. Motion + Time Lapse - Uses a combination of Time Lapse and Motion Detect modes at different times
of the day. Press the Right button to move to start motion capture.
NOTE: Options for Motion and Time Lapse can be set in their respective option menus.
D
SETTING MOTION DETECT OPTIONS
IMAGE REVIEW SOFTWARE INSTALLATION
Download your free Image Review software at www.moultriefeeders.com/imagesoftware
For PC users: Installation and operation instructions are available here, as well.
For Mac users: This software is not Mac-compatible. You can import your image files into a program such as iMovie and iPhoto.
Setup Selection Setting
From the Default Screen, pressing the Menu button will enter the current capture mode's Main Screen. Press the Down button 3 times to enter
GENERAL SETTINGS. Press the Left button to move to the next setting. Using this method you can customize your camera's feature settings.
From this Main Screen, press OK to get to the Test Capture screen. See pages 1 & 2 for the full layout of the camera menu.
For all menu navigation, use UP/DOWN to change and LEFT/RIGHT to navigate between options and OK to lock-in your selection.
6
Event Delay Setting
Detection Delay determines the number of minutes between pictures when an
animal is detected and remains in range. Choose between (NONE, 10 sec, 30 sec,
1 min, 5min, 10min, or 30 min).
PIR Sensitivity
PIR Sensitivity allows you to control as to how much movement and at what distance
the camera will trigger. HIGH sensitivity will allow for more distance, but will make
the camera slightly more susceptible to false triggers and is ideal for open areas such as
fields and food plots. LOW sensitivity will shorten the distance but lower the chance of
false triggers and is ideal for close range traps and deeply wooded areas.
Setting Multi-Shot
Choose how many pictures you would like captured in a sequence
when the camera is triggered (1 or 3).
Available options are:
1 (OFF) - Single photo taken per event.
3 BURST - Three rapidly captured photos taken per event. All 3 photos are captured within one second.
NOTE: Burst mode is only capable of up to 4MP captures, regardless of your resolution setting.
3 TRIGGERED - Up to three photos are captured per event with an approximate one second delay between each capture. Each subsequent photo
after the first requires an individual trigger. This allows for multiple potential image captures of the same event while reducing the chance of
empty images if the subject moves out of the field of view after the first shot.
D E T E C T I O N D E L A Y
1 0 S E C O N D S
P I R S E N S I T I V I T Y
H I G H
M U L T I - S H O T
1 ( O F F )
7